Previous
Sleep Mode Timer
After a specified period has passed, or the [Energy Saver] key is pressed, the printer enters Sleep Mode in order to conserve energy.
Specify the time to elapse before Sleep Mode.
The time can be set from 1 to 60 minutes, using the number keys.
Default:"1" minute(s)
Depending on which Embedded Software Architecture application is installed on it, the printer might take longer than indicated to enter Sleep Mode.
Printer Auto Reset Timer
You can specify the time to elapse before the printer function is reset.
The time can be set from 10 to 999 seconds, using the number keys.
Default: [On], "60" second(s)
Set Date
You can specify the date for the printer's internal clock using the number keys.
To change between year, month, and day, press [
] and [
].
Set Time
You can specify the time for the printer's internal clock using the number keys.
To change between hours, minutes and seconds, press [] and [].
(mainly Europe and Asia)
Enter the time using the 24-hour format (in 1 second increments).
(mainly North America)
Enter the time using the 12-hour format (in 1 second increments).
Auto Logout Timer
You can specify whether or not to automatically log out a user when the user does not operate the printer for a specified period of time after logging in.
The time can be set from 60 to 999 seconds in one second increments, using the number keys.
Default: [On], "180" second(s)
Fusing Unit Off Mode (Energy Saving) On/Off
You can specify whether or not to use Fusing Unit Off mode.
Default: [Off]
On
Turns on Fusing Unit Off mode. This setting further reduces power consumption, but the printer may take longer to recover from Fusing Unit Off mode.
When you select [On], you can set [Exit Fusing Unit Off Mode] and [Fusing Unit Off Mode Timer].
Off
Turns off Fusing Unit Off mode.
Exit Fusing Unit Off Mode
You can specify the condition for the printer to exit Fusing Unit Off mode.
Default: [On Printing]
On Printing
The printer exits Fusing Unit Off mode when printing is performed.
On Operating Control Panel
The printer exits Fusing Unit Off mode when any key on the control panel is pressed.
Fusing Unit Off Mode Timer
You can specify the period of time the printer waits before entering Fusing Unit Off mode.
The timer is reset if any key on the control panel is pressed or printing is performed.
Default: [10 seconds]
The Fusing Unit Off Mode Timer is reset when:
A print is performed
A cover is opened when [Exit Fusing Unit Off Mode] is set to [On Printing]
Any key on the operating panel is pressed when [Exit Fusing Unit Off Mode] is set to [On Operating Control Panel]
Weekly Timer
You can set the timer for the printer to turn off and on the main power or to enter and exit Sleep mode every day or on specified days of the week.
To use Weekly Timer, the date and time of the internal clock must be set using the control panel. For details, see Timer Settings.
When Weekly Timer is set to [Daily] or [Day of the Week], the printer does not turn on even if [ECO Night Sensor] is set to [Auto Power Off and On] and the time for turning on the main power specified in [Timer to Turn On] elapses.
Default: [Inactive]
Daily
Day of the Week
Inactive
When [Daily] or [Day of the Week] is selected, you can specify the following:
Weekly Timer Code
To configure this setting, administrator authentication must be enabled. For details, see Security Guide.
You can set a password (up to eight digits) for Weekly Timer. Once the password is set, the screen requiring the password is displayed while the printer is turned off or in Sleep mode by Weekly Timer. Enter the password to turn on the printer or recover the printer from Sleep mode.
If you set Weekly Timer Code to [Off], you do not need to enter a password to recover the printer.
Default: [Off]
Weekly Timer Schedule
You can specify when Weekly Timer takes effect (up to six settings).
Main Power On Timer Suspension Period
You can specify the period when the printer does not turn on the main power with the Weekly Timer settings.
During the period specified in [Main Power On Timer Suspension Period], the Weekly Timer Code is canceled at the time the printer turns on the main power with the Weekly Timer settings. If the printer is turned off during the period specified in [Main Power On Timer Suspension Period], the Weekly Timer setting to turn on the main power is disabled until the printer is turned on manually.
Fusing Heater Off on Standby
You can specify whether or not to turn off the fusing heater automatically when Sleep mode timer is set to 30 minutes or longer or Fusing Unit Off mode is disabled and the printer remains in standby mode for 30 minutes or longer. The printer consumes less energy when the fusing heater is turned off than when the printer is in standby mode.
Default: [Auto Turn Off]
Auto Turn Off
Do not Auto Turn Off
