Previous
Recycled Paper Setting
You can specify the thickness of the recycled paper.
For details about the actual paper weight, see Paper Type Specifications.
Default: [Plain Paper 2]
Plain Paper
Plain Paper 2
Middle Thick
Color Paper Setting
You can specify the thickness of the color paper.
For details about the actual paper weight, see Paper Type Specifications.
Default: [Plain Paper 2]
Plain Paper
Plain Paper 2
Middle Thick
Letterhead Setting
You can specify the thickness of the letterhead paper.
The paper thickness can be set for each tray separately.
For details about the actual paper weight, see Paper Type Specifications.
Default: [Plain Paper 2]
Thin Paper
Plain Paper
Plain Paper 2
Middle Thick
Thick Paper 1
Thick Paper 2
Label Paper Setting
You can specify the thickness of the label paper.
The paper thickness can be set for each tray separately.
For details about the actual paper weight, see Paper Type Specifications.
Default: [Thick Paper 1]
Plain Paper 2
Middle Thick
Thick Paper 1
Envelope Setting
You can specify the thickness of the envelope.
The paper thickness can be set for Tray 1 and the bypass tray.
For details about the actual paper weight, see Paper Type Specifications.
Default: [Plain Paper 2]
Plain Paper 2
Middle Thick
Thick Paper 1
Thick Paper 2
Preprinted Paper Setting
You can specify the thickness of the preprinted paper.
For details about the actual paper weight, see Paper Type Specifications.
Default: [Plain Paper 2]
Plain Paper
Plain Paper 2
Middle Thick
Replacement Alert
You can specify when the Alert Indicator lights up to prompt users to replace supplies.
Toner, Drum Unit, Maintenance Kit
Default: [Normal]
Notify Sooner
Normal
Notify Later
Supply End Option
You can specify whether or not to continue printing after the drum unit exceeds its service life.
Default: [Continue Printing]
Continue Printing
Stop Printing
Display Supply Info
You can specify whether or not the amount of toner is displayed on the initial screen.
Default: [On]
On
Off
Menu Protect
You can specify whether or not to protect the menu settings. If you enable this setting, you must specify a protection level.
If you want to lower the protection level, disable this setting or select [Level 1].
You may not be able to change this setting depending on the setting of the printer.
Default: [Level 2]
Level 1
Level 2
Off
List/Test Print Lock
You can specify whether or not to prohibit List/Test printing.
You may not be able to change this setting depending on the setting of the printer.
Default: [Off]
On
Off
Unit of measure
You can switch the unit of measurement between [mm] and [inch].
Default:
(mainly Europe and Asia)
[mm]
(mainly North America)
[inch]
mm
inch
Panel Key Sound
You can specify whether or not to enable the panel key sound.
Default: [On]
On
Off
Display Contrast
You can specify the display density by selecting one of seven levels.
Key Repeat
You can specify whether or not to scroll the display panel when the [
] or [
] key is held down. When you enable this setting, specify the scroll speed. (If repeat time is set to "Long", scroll speed becomes slow.)
Default: [Normal]
Do not Repeat
Normal
Repeat Time: Medium
Repeat Time: Long
