Previous
To use NetWare, select the appropriate NetWare frame type from the following:
Auto Select
Ethernet II
Ethernet 802.2
Ethernet 802.3
Ethernet SNAP
Usually, you can use the default setting (Auto Select). When you first select [Auto Select], the frame type detected by the printer is used. However, if your network can use more than two frame types, the printer may fail to select the correct frame type when [Auto Select] is selected. In this case, select the preferred frame type.
Press the [Menu] key, and then select the setting items using the [
] or [
] key.
Select [Host Interface] 
Press [OK]
Select [Network] Press [OK]
Select [NW Frame Type] Press [OK]
Select the frame type to use Press [OK]
Press the [User Tools] key, and then display the [Network] screen.
[System Settings] |
Select the NetWare frame type.
[NW Frame Type] |
