Printer Set Up Procedure

Select a suitable location for your printer.

For details, see Install Location.

Take the printer out of its box.

• Check the items that come with the printer.

  For details, see Checking the Contents of the Box.

• Remove the protective materials and adhesive tape.

  For details, see Unpacking.

Install the optional unit(s) and board(s) to the printer as necessary.

For details, see Installing Options.

Load paper in the paper feed tray.

For details, see Loading Paper.

Plug in the power cord, and then turn on the printer.

For details, see Connecting the Power Cord, and Turning On/Off the Power.

Select the language used on the display.

For details, see Selecting the Display Language.

Print a test page.

For details, see Test Printing.

Connect the printer to your network.

For details, see Connecting the Printer.

Configure the printer’s network settings.

For details, see Configuration.

Install the printer driver.

For details, see Driver Installation Guide.

Load paper in the paper feed tray.

For details, see Loading Paper.

Plug in the power cord, and then turn on the printer.

For details, see Connecting the Power Cord, and Turning On/Off the Power.

Select the language used on the display.

For details, see Selecting the Display Language.

Print a test page.

For details, see Test Printing.

Connect the printer to your network.

For details, see Connecting the Printer.

Configure the printer’s network settings.

For details, see Configuration.

Install the printer driver.

For details, see Driver Installation Guide.