Skip header
 

Using the [Printer] screen

This function is available for SP 4520DN only.

The display panel shows the operation status, messages, and function menus.

The function items displayed serve as selector keys. You can select or specify an item by lightly pressing these keys.

When you select or specify an item on the display panel, it is highlighted such as Operation panel screen illustration. Keys appearing as Operation panel screen illustration cannot be used.

Important

  • Do not apply strong impact or force to the screen. Doing so will damage the screen. Maximum force allowable is approx. 30N (approx. 3 kgf). (N = Newton, kgf = Kilogram force. 1 kgf = 9.8N.)

The [Home] screen is set as the default screen when the printer is turned on.

Operation panel screen illustration numbered callout illustration

  1. Operational status or messages

    Displays the current printer status, such as “Ready”, “Offline”, and “Printing...”. Information (user ID and document name) about the print job appears in this section.

  2. [Print Jobs]

    Press to display print jobs sent from a computer.

  3. Supply Information

    You can check the remaining toner and paper. Press to display the [Supplies Info] screen.

  4. [Prt. From Dev.]

    Press to display the screen for directly printing files stored on memory storage devices.

  5. [Job Reset]

    Press to cancel the current print job.

    If you press it when Hex Dump is selected, Hex Dump is canceled.

  6. [Job Operation]

    Press to suspend a job being processed.

  7. [Form Feed]

    Press to print all the data left in the printer's input buffer.

  8. [Other Functns.]

    Press to display the error logs and status of spooled jobs.

PreviousNext