Exterior: Front view

Front cover

Open to access the inside of the printer and remove jammed paper.

Open here to replace the print cartridge and the drum unit.

Tray Extension

Pull this fence to prevent paper from falling off.

Standard tray

Output is stacked here with the print side down.

Control panel

For details, see Guide to the Names and Functions of the Control Panel.

• For SP 4520DN

  You can adjust the display with your hands. Adjust the angle of it to see clearly.

  

Ventilation holes

Prevent overheating.

Memory cover

Remove this cover to install the optional SDRAM module and hard disk.

Front cover open button

Push this button to open the front cover.

Paper size dial

Use this dial to specify the paper size. To use a paper size that is not indicated on the paper size dial, set the dial to "". If this is the case, set the paper size using the control panel.

Bypass tray

Up to 100 sheets of plain paper can be loaded.

For details about the sizes and types of paper that can be used, see Paper Size Specifications and Paper Type Specifications.

Extender for the bypass tray

Pull this extender out when loading A4, 8¹/₂ × 11 or larger size paper in the bypass tray.

Paper guides

When loading paper in the bypass tray, align the paper guides flush against the paper.

Tray 1

Up to 500 sheets of plain paper can be loaded.

For details about the sizes and types of paper that can be used, see Paper Size Specifications and Paper Type Specifications.

Remaining paper indicator

Indicates the approximate amount of paper remaining in the tray.

Main power switch

Use this switch to turn the power on and off.

For details about how to shut down the printer, see Turning Off the Power.

Bypass tray open lever

Push this lever to open the bypass tray.