Skip header
 

Setting Ethernet Speed

You can set the speed that the machine will use for Ethernet communications. In most cases, you should select [AutoSelct:Enable 1Gbps] or [AutoSelct:Disable 1Gbps] according to your network environment. This setting allows two interfaces to automatically determine the optimum speed when they are connected.

For details about Ethernet Speed settings, see "Interface Settings", Connecting the Machine/System settings.

Important

  • A connection cannot be established if the selected Ethernet speed does not match your network's transmission speed.

  • In order to reduce power consumption of network devices, the default Ethernet speed of the machine is up to 100BASE-TX (100 Mbps). If you need communication with a higher speed, select [AutoSelct:Enable 1Gbps] to enable 1000BASE-T (1Gbps) communication.

1Press the [User Tools/Counter] key.

2Press [System Settings].

3Press [Interface Settings].

4Press [Network].

5Press [Down arrow key] to display [Ethernet Speed].

6Press [Ethernet Speed].

7Select the Ethernet speed.

8Press [OK].

9Press the [User Tools/Counter] key.

PreviousNext