Previous
To use NetWare, select the appropriate NetWare frame type from the following.
Auto Select
Ethernet II
Ethernet 802.2
Ethernet 802.3
Ethernet SNAP
Usually, you can use the default setting (Auto Select). When you first select [Auto Select], the frame type detected by the machine is used. However, if your network can use more than two frame types, the machine may fail to select the correct frame type when [Auto Select] is selected. In this case, select the preferred frame type.
Press the [User Tools/Counter] key.
Press [System Settings].
Press [Interface Settings].
Press [Network].
Press [
] to display [NW Frame Type].
Press [NW Frame Type].
Select the frame type to use.
Press [OK].
Press the [User Tools/Counter] key.
