Select the size of the original to be scanned.
[Regular Size]
Select a template size to scan originals at a specified size regardless of the actual size of the originals you have placed.
You can specify the following sizes:
A4, A5, A5, B5 JIS, 81/2 × 14, 81/2 × 13, 81/2 × 11, 51/2 × 81/2, 51/2 × 81/2
[Custom Size]
Select [Custom Size] to scan originals whose sizes do not match a standard template or to scan only a part of an original by selecting [Partial Scan].
You can specify the length and width of your originals in mm or inches.
[Programmed Size]
Scan size settings registered in [Program/Change Scan Size] are shown. For details about [Program/Change Scan Size], see Scan Settings.
[LT/LG Mixed Sizes]
(mainly Europe and Asia)
To use this function, consult your service representative.
(mainly North America)
If you scan mixed size originals of 8 1/2 14 and 8 1/2 11 paper using the ADF, the sizes of the scanned originals will be the same as the originals placed in the ADF.
You can enter 10 mm (0.4 inches) or higher in Size of Original (X1 and Y1) under Custom Size.