This section describes how to copy the front and back sides of an ID card, or other small original, onto one side of a sheet of paper.
Front
Back
The Duplex function cannot be used with this function. If [1 Sided 2 Sided:TtoT] is selected, cancel the setting.
This function allows you to copy the original onto the top and bottom halves or the right and left halves of paper. For example, when copying onto an A4 (81/2 × 11) size sheet of paper, the front of the original is copied onto the top half of the paper in a space the same as A5 (51/2 × 81/2)
and the back of the original is copied onto the bottom half. Place the original in the center of the scanning area when using this function.
We recommend that you use A4 or 81/2 × 11
size paper with this function.
Before using this function, assign [ID Card Copy] to one of the Customize Function keys in [Customize Function: Copier] in User Tools. For details, see General Features.
Press [ID Card Copy].
Select the paper tray.
Place the original front side down on the exposure glass.
When copying onto the top and bottom halves of paper
Place the original in orientation and in the center of the A5 (51/2 × 81/2)
scan area.
When copying onto the left and right halves of paper
Place the original in orientation and in the center of the A5 (51/2 × 81/2)
scan area.
Press the [Start] key.
Press the original back side down on the exposure glass, and then press the [Start] key again.
If you press [ID Card Copy] after specifying the reproduction ratio, the reproduction ratio is canceled.