Previous
Select the size of the original to be scanned.
[Auto Detect]
Scans original sizes using the automatic size detect function.
[Mixed Original Sizes]
Select [Mixed Original Sizes] to scan a batch of originals that have different lengths.
Originals are scanned by the ADF and the length of each is automatically detected.
(mainly Europe and Asia)[Mixed Original Sizes] can be selected for paper sizes larger than B6 or 81/2 × 11.
(mainly North America)[Mixed Original Sizes] can be selected for paper sizes larger than A4 or 51/2 × 81/2.
[Partial Scan]
Select [Partial Scan] to scan an original partially.
You can specify the dimensions of an area to be scanned in millimeters or inches.
[Custom Size]
Select [Custom Size] to scan originals whose sizes do not match a standard template or to scan only a part of an original.
You can specify the length and width of your originals in mm or inches.
Template size Erase Center / Border
Select a template size to scan originals at a specified size regardless of the actual size of the originals you have placed.
You can specify the following template sizes:
A3
, A4
, A4, A5, A5, B4 JIS(Japanese Industrial Standard), B5 JIS, B5 JIS, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/2 × 11, 51/2 × 81/2, 51/2 × 81/2
Available template sizes vary depending on the country of purchase.
Selecting both [Mixed Original Sizes] and [Erase Center / Border] reduces the scanning speed.
You can enter 10mm (0.4 inches) or higher in Original Size (X1 and Y1) under [Custom Size].
If the size of an original placed in the ADF cannot be detected automatically, the original might be scanned at a different size. For details about paper sizes that can be automatically detected when placed in the ADF, see "Specifications for Scanner", Maintenance and Specifications.
