Top Page > About This Machine > Getting Started > Guide to Functions of the Machine's Options > Guide to Functions of the Machine's External Options > External options for Type 4 and 5 
(mainly North America)
Previous
Smart Operation Panel
This control panel is provided with advanced operativity.
Handset
Used as a receiver when a fax unit is installed.
Allows you to use the On Hook Dial and Manual Dial functions. It also allows you to use the machine as a telephone.
Lower paper tray
Holds up to 550 sheets of paper.
Caster table for lower paper tray
To use the lower paper tray, attach the caster table.
Tray 3 (LCT)
Holds up to 2,000 sheets of paper.
You can load paper even if Tray 3 (LCT) is in use. It is okay to pull out the left half of the tray while Tray 3 (LCT) is in use.
Large capacity tray (LCT)
Holds up to 1,500 sheets of paper.
Lower paper trays
Consists of two paper trays. Holds up to 1,100 sheets of paper. Each paper tray holds 550 sheets.
Internal tray 2
If you select this as the output tray, copied/printed paper or fax messages are delivered here face down.
Bridge unit
Relays paper to the finisher.
Internal shift tray
Sorts and stacks multiple sheets of paper.
External tray
If you select this as the output tray, copied/printed paper and fax messages are delivered here face down.
Internal Finisher SR3130
Sorts, stacks, and staples multiple sheets of paper.
Copies can be punched if the optional punch unit is installed on the finisher.
Finisher SR3140
Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
Finisher upper tray
Finisher shift tray
Copies can be punched if the optional punch unit is installed on the finisher.
Booklet Finisher SR3150
Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:
Finisher upper tray
Finisher shift tray
Finisher booklet tray
Copies can be punched if the optional punch unit is installed on the finisher.
Finisher SR3160
Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
Finisher upper tray
Finisher shift tray
Copies can be punched if the optional punch unit is installed on the finisher.
Booklet Finisher SR3170
Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:
Finisher upper tray
Finisher shift tray
Finisher booklet tray
Copies can be punched if the optional punch unit is installed on the finisher.
You cannot install multiple finishers simultaneously.
Finisher SR3140, Finisher SR3160, Booklet Finisher SR3150, and Booklet Finisher SR3170 can be attached only if the bridge unit and either lower paper trays or Tray 3 (LCT) is installed.
