Skip header
 

External options for Type 4 and 5 Region A icon(mainly Asia)

Illustration of external options numbered callout illustration

  1. Exposure glass cover

    Lower this cover over originals.

  2. One-pass duplex scanning ADF

    Load a stack of originals here. They will feed in automatically.

  3. ARDF

    Load a stack of originals here. They will feed in automatically.

  4. Smart Operation Panel

    This control panel is provided with advanced operativity.

  5. Lower paper tray

    Holds up to 550 sheets of paper.

  6. Caster table for lower paper tray

    To use the lower paper tray, attach the caster table.

  7. Tray 3 (LCT)

    Holds up to 2,000 sheets of paper.

    You can load paper even if Tray 3 (LCT) is in use. It is okay to pull out the left half of the tray while Tray 3 (LCT) is in use.

  8. Large capacity tray (LCT)

    Holds up to 1,500 sheets of paper.

  9. Lower paper trays

    Consists of two paper trays. Holds up to 1,100 sheets of paper. Each paper tray holds 550 sheets.

  10. Internal tray 2

    If you select this as the output tray, copied/printed paper or fax messages are delivered here face down.

  11. Bridge unit

    Relays paper to the finisher.

  12. Internal shift tray

    Sorts and stacks multiple sheets of paper.

  13. External tray

    If you select this as the output tray, copied/printed paper and fax messages are delivered here face down.

  14. Internal Finisher SR3130

    Sorts, stacks, and staples multiple sheets of paper.

    Copies can be punched if the optional punch unit is installed on the finisher.

  15. Finisher SR3140

    Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:

    • Finisher upper tray

    • Finisher shift tray

    Copies can be punched if the optional punch unit is installed on the finisher.

  16. Booklet Finisher SR3150

    Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:

    • Finisher upper tray

    • Finisher shift tray

    • Finisher booklet tray

    Copies can be punched if the optional punch unit is installed on the finisher.

  17. Finisher SR3160

    Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:

    • Finisher upper tray

    • Finisher shift tray

    Copies can be punched if the optional punch unit is installed on the finisher.

  18. Booklet Finisher SR3170

    Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:

    • Finisher upper tray

    • Finisher shift tray

    • Finisher booklet tray

    Copies can be punched if the optional punch unit is installed on the finisher.

Note

  • You cannot install multiple finishers simultaneously.

  • Finisher SR3140, Finisher SR3160, Booklet Finisher SR3150, and Booklet Finisher SR3170 can be attached only if the bridge unit and either lower paper trays or Tray 3 (LCT) is installed.

PreviousNext