Guide to Components (mainly Europe)

Front and left view

1. ADF

   (The illustration shows the ARDF.)

   Lower the ADF over originals placed on the exposure glass.

   If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.

2. Exposure glass

   Place originals face down here.

3. Vents

   Prevent overheating.

4. Control panel

   See Guide to the Names and Functions of the Machine's Control Panel (When Using the Standard Operation Panel) or Guide to the Names and Functions of the Machine's Control Panel (When Using the Smart Operation Panel).

5. Main power switch

   To operate the machine, the main power switch must be on. If it is off, open the main power switch's cover and turn the switch on.

6. Internal tray 1

   Copied/printed paper and fax messages are delivered here.

7. Front cover

   Open to replace the toner cartridge.

8. Paper trays (Trays 1–2)

   Load paper here.

9. Lower paper trays

   Load paper here.

Front and right view

1. ADF's extender

   Pull this extender to support large paper.

2. Bypass tray

   Use to copy or print on OHP transparencies, adhesive labels, and paper that cannot be loaded in the paper trays.

3. Paper guides

   When loading paper in the bypass tray, align the paper guides flush against the paper.

4. Extender

   Pull this extender out when loading sheets larger than A4, 8¹/₂ × 11 in the bypass tray.

5. Vents

   Prevent overheating.

6. Lower right cover

   Open this cover when a paper jam occurs.

7. Right cover

   Open this cover when a paper jam occurs.

Rear and left view

1. Vents

   Prevent overheating.