Settings List

[System] page

You can specify [Device Name] and [Location].

[Date/Time] page

You can specify [Set Date], [Set Time], [SNTP Setting], [SNTP Server Address], [SNTP Port No.], [SNTP Polling Interval], [Time Zone], [Set Daylight Saving], [Set Daylight Saving Time (Start)], [Set Daylight Saving Time (End)], and [Offset Time].

[Email] page

For details about the items and descriptions, see Notifying the Machine Status by E-mail.

[Auto Email Notification] page

For details about the items and description, see Notifying the Machine Status by E-mail.

[File Transfer] page

You can specify [SMB User Name], [SMB Password], [FTP User Name], [FTP Password], and [Default Subject].

[LDAP Server] page

Program the LDAP server to find up e-mail destinations in the LDAP server address book directly.

You can specify whether to enable or disable [LDAP Search].

[Remote ROM Update] page

You can check the ROM firmware version and update the firmware as necessary. Download the latest update from the manufacturer's website and update the firmware according to the displayed instructions.

[Administrator Authentication Management] page

You can specify [New Password].

[Reset Device] page

You can restore the default settings for the network interface.

[Interface Settings] page

You can select either [Ethernet] or [Wireless LAN].

• [Ethernet]

  You can specify [Network], [MAC Address], and [Ethernet Speed].

[Wireless LAN Settings] page

• [Status]

  You can check [Product ID], [Version], [Band], [Channel Number], [BSSID], [MAC Address], [Current status], [Sent Packets], [Received Packets], [Easy Setup Status], [Signal Strength], and [TX Status].

• [Settings]

  You can specify [SSID] and [Encryption].

• [WEP settings]

  You can specify [Key Length], [Key Format], and [WEP Key].

• [WPA settings]

  You can specify [WPA], [Pre-shared Key Format], [Pre-shared Key], [EAP-Type], [EAP User ID], [RADIUS User Name], [RADIUS User Password], and [User Key Password].

[IPv4] page

You can specify whether to enable or disable [IPv4].

• [Ethernet]

  You can specify [Host Name], [Workgroup Name], [DHCP], [IPv4 Address Save], [Domain Name], [IPv4 Address], [Subnet Mask], and [DDNS].

• [Detailed Settings]

  You can specify [Default Gateway Address], [DNS Server], [LPR], [DIPRINT], [WSD (Printer)], [LLTD], and [IPP].

[IPv6] page

You can specify whether to enable or disable [IPv6].

• [Ethernet]

  You can specify [Host Name], [Workgroup Name], [Domain Name], [Link-local Address], [Stateless Address], [Manual Configuration Address], [Prefix Length], and [DDNS].

• [Details]

  You can specify [Default Gateway Address], [DNS Server 1], [DNS Server 2], [LPR], [DIPRINT], [LLTD] and [IPP].

[DHCPv6] page

You can specify whether to enable or disable [DHCPv6].

• [Details]

  You can specify [DHCPv6-lite/full], [Stateless Address], [DUID], [IAID], and [Option Update Interval].

[Bonjour] page

You can specify whether to enable or disable IPv4 and IPv6 when using [Bonjour].

• [Ethernet]

  Displays the local host name currently registered.

• [Details]

  You can specify [Computer Name] and [Location].

• [Print Order Priority]

  You can specify [DIPRINT], [LPR], and [IPP].

[SNMP] page

You can specify whether to enable or disable [SNMP].

• [Protocol]

  You can specify whether to enable or disable IPv4 and IPv6 when using [SNMP].

• [SNMPv1,v2 Setting]

  You can specify [SNMPv1,v2 Function], [SNMPv1 Trap Communication], and [SNMPv2 Trap Communication].

• [Community]

  You can configure up to ten SNMP communities.

[SNMPv3] page

You can specify whether to enable or disable [SNMP].

• [Protocol]

  You can specify whether to enable or disable IPv4 and IPv6 when using [SNMP].

• [SNMPv3 Setting]

  You can specify [SNMPv3 Function], [SNMPv3 Trap Communication], [Context Name], [Authentication Algorithm], and [Permit SNMPv3 Communication].

• [SNMPv3 Trap Communication Setting]

  You can configure up to five SNMPv3 trap destinations.

• [Account(User)]

  You can specify [Account Name(User)], [Authentication Password(User)], [Encryption Password(User)], and [Access Type(User)].

• [Account(Administrator)]

  You can specify [Account(Administrator)], [Authentication Password(Administrator)], [Encryption Password(Administrator)], and [Access Type(Administrator)].

[Restore Factory Defaults] page

You can reset the machine's configuration to the factory default.

[Access Control] page

• [IPv4]

  You can configure up to five access control ranges.

• [IPv6]

  You can configure up to five access control ranges and Mask settings.

[Certificate Installation] page

You can specify [User Certificate], [Root Certificate], and [Delete All Certificate].

[Environment Settings] page

You can specify whether to enable or disable Internet Fax.

• [Fax Information]

  You can specify [Fax Header] and [Own Fax Number].

• [Select Dial/Push Phone]

  You can specify a line type when the device is connected to a G3 analog line.

[Send / Reception Settings] page

• [Transmission Settings]

  You can specify whether or not to limit Internet Fax transmissions.

  You can specify the maximum size in [Email Size].

• [Reception Settings]

  You can specify [Switch Reception Mode] and [Print Reception Time] settings.

[Fax Parameter Settings] page

• [Automatic Printing Report]

  You can specify [Journal], [Immediate Transmission Result Report], [Communication Result Report], and [Polling Reception Result Report] settings.

• [Email]

  You can specify whether or not an error notification e-mail is sent if an error occurs during receipt of e-mail.