Copier Features Menu

You can specify whether auto image density is set to "On" or "Off" when the machine is turned on or the current mode setting is cleared. "Auto Image Dens. Priority" can be used only if copying in black-and-white mode is enabled and "Original Type" is set to "Text".

Default: [Off]

You can specify which type of the original is available when the power is turned on or the current mode setting is cleared.

• Text

• Text/Photo

• Photo

Default: [Text/Photo]

If you load same size paper in two or more trays, the machine automatically shifts to the other tray using image rotation when the first tray runs out of paper (if [On] is selected.) This setting specifies whether to use auto tray switching or not.

Default: [On]

You can select whether or not to sound a buzzer when a copy is completed.

If [Panel Key Sound] of [General Features] ([System Settings]) is turned on, the machine beeps to notify you that it did not complete a job for reasons such as copying was interrupted, the paper tray ran out of paper, or a paper jam occurred.

Default: [On]

You can specify the enlargement and reduction ratios that appear if [R/E] is pressed on the copier screen.

You can register up to six frequently used reproduction ratios.

(mainly Europe and Asia)

50% (A4 A6)

61% (A4 B6JIS)

65%

71% (A4 A5, A5 A6)

82% (B5JIS A5)

93%

100%

115% (B5JIS A4)

122% (A5 B5JIS, A6 B6JIs)

141% (A5 A4, A6 A5)

200% (A6 A4)

400%

(mainly North America)

50% (A4 A6)

65%

73%

85%

93%

100%

129%

155% (HLT LG)

400%

You can set the ratio with priority when [R/E] is selected.

Default: [100%]

Using the number keys, enter the ratio from "25-400" in units of 1%.

Specify the density level of auto image density.

Use auto image density to copy a document with its background image density automatically reduced.

Default: [3] (the halfway/medium setting)

This function enables the printer to notify users if the paper in the tray does not match the paper size specified in the [Tray Paper Setting] menu.

If you select [Off], even if the paper size does not match, printing proceeds without an error being displayed.

Default: [On]