IEEE 802.11

This section describes the user tools in the [IEEE 802.11] menu under [Interface Settings].

Be sure to make all settings.

Det. Settings

SSID
Enter the SSID (name of the wireless network) to identify the network.
Encryption
Configure the wireless LAN encryption.
- Inactive
- WEP
- WPA-PSK
- WPA-EAP
Default: [Inactive]
WPA
Select the WPA cipher suite.
- WPA(TKIP)
- WPA(AES)
- WPA2(AES)
Default: [WPA(TKIP)]
Pre-shared Key Format
Select [Passphrase] or [Hex].
- Passphrase
- Hex
Default: [Passphrase]
Pre-shared Key
Enter the pre-shared key in the format selected in [Pre-shared Key Format].
If you have selected [Passphrase] in [Pre-shared Key Format], enter 8 to 63 alphanumeric characters. If you have selected [Hex] in [Pre-shared Key Format], enter up to 64 hexadecimal digits.
Key Length
Select 64 bit or 128 bit. This is required for specifying the encryption key setting.
- 64bit
- 128bit
Default: [64bit]
Key Format
Select ASCII or Hex. This is required for specifying the encryption key setting.
Items displayed if [Key Length] is set to [64bit]
- ASCII (5 digits)
- Hex (10 digits)
Items displayed if [Key Length] is set to [128bit]
- ASCII (13 digits)
- Hex (26 digits)
Encryption Key
Configure the WEP encryption key.
EAP Type
Select the EAP type.
- PEAP
- TLS
Default: [PEAP]
EAP User ID
Enter the user ID to be used for EAP.
RADIUS User Name
Enter the user name for accessing the RADIUS server.
RADIUS User Password
Enter the password for accessing the RADIUS server.
User Password
Enter the password for PEAP authentication.
Country Code

Easy Setup

Current status

You can check the following items: