Skip header
Help
 

Network

This section describes the user tools in the [Network] menu under [Interface Settings].

Machine IPv4 Address

Specify the machine's IPv4 network address.

  • Auto-Obtain (DHCP)

  • Specify

Default: [Auto-Obtain (DHCP)]

When you select [Specify], enter the IPv4 address and subnet mask as "xxx.xxx.xxx.xxx" ("x" indicates a number).

When you select [Specify], make sure that IPv4 address is different from that of another machines on the network.

The physical address (MAC address) also appears.

After changing this setting, turn the machine off, and then turn it on again.

IPv4 Gateway Address

A gateway is a connection or interchange point between two networks.

Specify the gateway address for the router or host computer used as a gateway.

After changing this setting, turn the machine off, and then turn it on again.

Default: 0.0.0.0

Machine IPv6 Address

Displays the machine's IPv6 network address.

  • Link-Local Address

    The machine's specified link-local address appears.

  • Manual Config. Address

    The machine's manually configured address appears.

  • Stateless Address 1-5

    The specified stateless address appears.

IPv6 Gateway Address

Displays the machine's IPv6 gateway address.

IPv6 Stateless Setting

Specify IPv6 Stateless Address Autoconfiguration.

After changing this setting, turn the machine off, and then turn it on again.

Default: [Active]

DNS Configuration

Make settings for the DNS server.

  • Auto-Obtain (DHCP)

  • Specify

Default: [Auto-Obtain (DHCP)]

When you select [Specify], enter the DNS Server IPv4 address as "xxx.xxx.xxx.xxx" ("x" indicates a number).

DDNS Configuration

Specify the DDNS settings.

Default: [Active]

Domain Name

Specify the domain name.

After changing this setting, turn the machine off, and then turn it on again.

  • Auto-Obtain (DHCP)

  • Specify

Default: [Auto-Obtain (DHCP)]

When you select [Specify], enter the domain name using up to 63 characters.

Effct. Protocol

Select protocols to use in the network.

After changing this setting, turn the machine off, and then turn it on again.

  • IPv4

    Default: [Active]

  • IPv6

    Default: [Inactive]

SMB Work Group

Specify the SMB work group.

Enter the computer name using up to 20 characters.

Ethernet Speed

Set the access speed for networks.

After changing this setting, turn the machine off, and then turn it on again.

  • Auto Select

  • 100Mbps Full Duplex

  • 100Mbps Half Duplex

  • 10Mbps Full Duplex

  • 10Mbps Half Duplex

Default: [Auto Select]

Select a speed that matches your network environment. [Auto Select] should usually be selected.

Machine Setting

Settings of the connectable device

Auto Select *1

Auto Select, 10Mbps Half Duplex, 100Mbps Half Duplex

10Mbps Full Duplex

100Mbps Full Duplex

10Mbps Half Duplex

Auto Select, 10Mbps Half Duplex

100Mbps Full Duplex

100Mbps Full Duplex

100Mbps Half Duplex

Auto Select, 100Mbps Half Duplex

*1 Terms will vary depending on the network.

LAN Type

Select the method of connection.

After changing this setting, turn the machine off, and then turn it on again.

  • Ethernet

  • IEEE 802.11b/g/n

Default: [Ethernet]

Permit SNMPv3 Communictn.

Set the encrypted communication of SNMPv3.

  • Encryption/Cleartext

  • Encryption Only

Default: [Encryption/Cleartext]

If you select [Encryption Only], you need to specify the encryption password for the machine.

Permit SSL/TLS Comm.

Set the encrypted communication of SSL/TLS.

  • Ciphertext Only

  • Ciphertext Priority

  • Ciphertext/Cleartext

Default: [Ciphertext/Cleartext]

If you select [Ciphertext Only], you need to install the SSL certificate for the machine.

Auto Email Notify

You can specify whether or not to send notification that a printer error has occurred to a particular e-mail address.

After changing this setting, turn the machine off and then back on.

Default: [Inactive]

Host Name

Specify the host name.

Enter the host name using up to 63 characters.

You cannot enter a host name starting or ending with a hyphen.

You cannot enter a host name starting with "RNP" or "rnp".

Machine Name

Specify the machine name.

Enter the machine name using up to 30 characters.

Restore Network Defaults

Resets the network settings to their default values.