Skip header
 

Importing Device Information

Import device information saved on an SD card.

1Insert an SD card into the media slot on the side of the control panel.

For details about inserting the SD card, see "Inserting/Removing a Memory Storage Device", Getting Started.

2Log in from the control panel as an administrator with all privileges.

3Press [System Settings].

4Press [Administrator Tools].

5Press [Down arrow keyNext] 4 times.

6Press [Device Setting Information: Import (Memry Strge Devc)].

7Configure the import conditions.

Operation panel screen illustration

  • Press [Select] of the "Device Setting Info. File" to select the file(s) to import.

  • When adding an image to a home screen, press [Select] for "Image for Home Screen", and then select the file.

    This setting is applied to the standard operation panel.

  • Specify whether to [Include] or [Exclude] the "Device Unique Information". "Device Unique Information" includes the IP address, host name, fax number, etc.

  • Enter the encryption key that was specified when the file was exported.

8Press [Run Import].

9Press [OK].

10Press [Exit].

The machine restarts.

Note

  • If import or export fails, you can check the log for the error. The log is stored in the same location as the exported device setting information file.

PreviousNext