Skip header
 

Configuring the Auto-Reset Function

The print volume counter can be reset at a specified time.

Options

Details

Every Month

Resets the print volume at the specified time/date each month.

Specify Date

Resets the print volume (only once) at the specified time/date.

Specify Cycle

Resets after the specified interval from a reference date, then resets thereafter at the same interval.

1Log in as the machine administrator from the control panel.

2Press [System Settings].

3Press [Administrator Tools].

4Press [Down arrow keyNext] 4 times.

5Press [Volume Use Counter: Scheduled/Specified Reset Settings].

Operation panel screen illustration

6Select one of [Every Month], [Specify Date] and [Specify Cycle].

7Configure the conditions.

8Press [OK].

9Log out.

Note

  • If the machine is turned off at the specified time on the specified date, the print volume will be reset when the power is turned on.

  • If you select in [Every Month] a date, such as the 31st day, which some months have and other months do not have, the print volume will be reset at 0:00 on the 1st day of the month that comes after the month that does not have the 31st day.