Skip header
 

Before Using This Machine

This section explains how to encrypt transmitted data and configure the administrator account. If you want a high level of security, make the following setting before using the machine.

1Turn the machine on.

For details about turning on the main power, see "Turning On/Off the Power", Getting Started.

2Display the initial settings screen.

  • When using the standard operation panel:

    Press the [User Tools/Counter] key.

    User Tools/Counter key illustration

  • When using the Smart Operation Panel:

    Press the [Home] key on the top left of the control panel. Flick the screen to the left, and then press the [User Tools] icon (Operation panel screen illustration) on the Home screen 4.

3Press [System Settings].

4Press [Interface Settings].

5Specify IPv4 Address.

For details on how to specify the IPv4 address, see "Interface Settings", Connecting the Machine/System Settings.

6Press [File Transfer] in [System Settings].

7Press [Administrator's Email Address], and then specify the e-mail address of the administrator of this machine.

8Create and install the device certificate from the control panel.

For information on how to install the device certificate, see Protecting Communication Paths via a Device Certificate.

As the e-mail address for the device certificate, enter the address specified in Step 7.

9Change the administrator's user name and password.

For details about specifying administrators' user names and passwords, see Registering and Changing Administrators.

10Connect the machine to the general usage network environment.

Note