Skip header
 

Registering a User Code

1Display the Address Book screen.

  • When using the standard operation panel

    Press the [Home] key on the bottom left of the control panel, and press the [Address Book Management] icon on the [Home] screen.

  • When using the Smart Operation Panel

    Press the [Home] key on the top left of the control panel. Flick the screen to the left, and then press the [Address Book Management] icon on the Home screen 4.

2Check that [Program / Change] is selected.

3Press the name whose code is to be registered, or enter the registered number using the number key.

You can search by the registered name, user code, fax number, folder name, e-mail address, or IP-Fax destination.

4Press [Auth. Info].

5Press [Change] under "User Code".

6Enter the user code using the number keys, and then press the [Hash] key.

Operation panel screen illustration

7Press [Down arrow keyNext] to display "Available Functions".

8Select the functions to be used with the user code from "Available Functions".

Operation panel screen illustration

Operation panel screen illustration

9Press [OK].

10Close the Address Book screen.

  • When using the standard operation panel

    Press the [User Tools/Counter] key.

  • When using the Smart Operation Panel

    Press [User Tools/Counter] (Operation panel screen illustration) on the top right of the screen.

Note

  • You can enter a one-to eight-digit user code.

  • If a user uses the browser function, only the functions specified for this setting are available. If [Browser] is selected and [Printer] is not selected, the printer function cannot be used with the browser function.

  • To register the name, see Registering User Information.