Printer Features

PreviousNext

Select [Printer Features] in the pop-up menu to change the printer specific settings.

The available items and settings may differ depending on the printer model and attached options. The display for the printer functions can be switched by selecting the [Feature Sets:] list.

1. Fit to Paper:

   The document is automatically reduced or enlarged to fit the paper size selected.

   • Prompt User

     The print job is performed with the size of document to be printed unchanged.

   • Nearest Size and Scale

     If the paper size is smaller than the selected paper size, the driver reduces the print size.

     If the paper size is larger than the size of document to be printed, the print job is not adjusted to fit the paper size.

   • Nearest Size and Crop

     The print job is performed regardless of any differences between the selected and actual paper size. However, the print job is not adjusted to fit the paper size.

2. Print Mode:

   Specify whether or not to conserve toner when printing.

3. Image Smoothing:

   Specify whether or not to perform image smoothing, or specify the threshold resolution to apply smoothing.

4. Dithering:

   Select a dithering pattern suitable for the document image.

   • Auto

     Automatically configures the best dithering method depending on the appearance of the document to print.

   • Photographic

     Performs dithering using a pattern appropriate for photographs.

   • Text

     Performs dithering using a pattern appropriate for text.

   • User Setting

     Select this when you print images set in half tone in your application.

   • Reduce Missing Colors and Blurring

     Performs dithering using a pattern appropriate for thin lines and small fonts.

5. Paper Type:

   Select the paper type to use.

6. Destination:

   Select the output tray in which the printed paper is delivered.

7. Staple:

   Specify whether to staple the output sheets. When enabling the staple function, specify the staple position.

8. Punch:

   Specify whether to make punch holes in the output sheets. When enabling the punch function, specify the punch hole position.

9. Fold Type:

   Specify whether or not to fold the output sheets. When enabling the fold function, apply the following fold type:

   • Half Fold - Print Outside (Finisher Booklet Tray)

     Folds prints in half with the printed side facing outside and delivers them to the finisher booklet tray.

10. Rotate by 180 degrees:

    Specify whether or not to rotate the image by 180 degrees when printing.

11. Orientation Override:

    Select this setting when paper orientation cannot be specified in some applications. If data is rotated in unwanted direction on the output page, use this setting to specify the data orientation to be applied when printing.

12. Watermark:

    Set the Watermark function.

13. Watermark Text:

    Select the Watermark text type.

14. Watermark Font:

    Select the Watermark font type.

15. Watermark Size:

    Select the Watermark size.

16. Watermark Angle:

    Select the Watermark angle.

17. Watermark Style:

    Select the Watermark style.

18. Banner Page:

    The banner page is printed first in each print job. It shows the user name, the time and date when the job was printed, the host name, and the job name. This function is available only if you selected [Normal Print] in the [Job Type:] list.

19. Banner Page Input Tray:

    Select an input tray.

20. Banner Page Paper Type:

    Specify the type of printing medium you want to use.

21. Booklet:

    Prints output so that you can fold it into a booklet.