bonjour

Bonjour settings are displayed.

msh> bonjour

You can specify the bonjour service name.

msh> bonjour cname "computer name"

• The computer name can be entered using up to 63 alphanumeric characters.

• If you do not specify a character string, the current setting is displayed.

You can enter information about the location where the printer is installed.

msh> bonjour location "location"

• Information about the location can be entered using up to 32 alphanumeric characters.

• If you do not specify a character string, the current setting is displayed.

• msh> bonjour diprint [0-99]

• msh> bonjour lpr [0-99]

• msh> bonjour ipp [0-99]

You can specify the order of priority for "diprint", "lpr", and "ipp". Smaller numbers indicate higher priority.

msh> bonjour ipttl [1-255]

You can specify the IP TTL (the number of routers a packet can pass through).

• The default is 255.

You can reset the computer name and location information.

msh> bonjour clear {cname|location}

• cname: Reset the computer name. The default computer name will be displayed when the computer is restarted.

• location: Reset the location information. The previous location information will be deleted.

msh> bonjour linklocal "interface_name"

• If you do not specify an interface, the Ethernet interface is automatically selected.

• If many types of interface are installed, configure the interface that communicates with linklocal address.

• wlan can be specified only when the IEEE 802.11 interface is installed.

msh> bonjour ippport {ipp|ssl}

• If IPP-SSL printing is set to {ssl}, the IPP port number will appear as 443, and IPP-SSL printing can be performed with higher security.

• If IPP-SSL printing is set to {ipp}, the IPP port number will appear as 631. Port 631 is the port for normal IPP printing.