Skip header
 

Setting up using NWadmin

1From Windows, start NWadmin.

For details about NWadmin, see the NetWare manuals.

2Select the object in which the print queue is located in the directory tree, and then click [Create] on the [Object] menu.

3In the [Class of new object] box, click [Print Queue], and then click [OK].

4In the [Print Queue Name] box, enter the name of the print queue.

5In the [Print Queue Volume] box, click [Browse].

6In the [Available objects] box, click the volume in which the print queue is created, and then click [OK].

7Check the settings, and then click [Create].

8Select the object in which the printer is located, and then click [Create] on the [Object] menu.

9In the [Class of new object] box, click [Printer], and then click [OK].

10In the [Printer name] box, enter the printer name.

11Select the [Define additional properties] check box, and then click [Create].

12Click [Assignments], and then click [Add] in the [Assignments] area.

13In the [Available objects] box, click the queue you created, and then click [OK].

14Click [Configuration], click [Parallel] in the [Printer type] list, and then click [Communication].

15Click [Manual load] in the [Communication type] area, and then click [OK].

16Check the settings, and then click [OK].

17Select a context specified, and then click [Create] on the [Object] menu.

18In the [Class of new object] box, click [Print Server], and then click [OK].

19In the [Print Server Name] box, enter the print server name.

Use the same print server name specified using Web Image Monitor.

20Select the [Define additional properties] check box, and then click [Create].

21Click [Assignments], and then click [Add] in the [Assignments] area.

22In the [Available objects] box, click the queue you created, and then click [OK].

23Check the settings, and then click [OK].

24Start the print server by entering the following from the console of the NetWare server.

If the print server is in operation, quit and restart it.

To quit

CAREE: unload pserver

To start

CAREE: load pserver [print server name]