Skip header
 

Specific Period Settings

1Press [Specific Period Settings].

2Press [Change] at the right of the item you want to specify.

Operation panel screen illustration

3Press [Start Date / Time].

4Enter the date and time, and then press [Sharp].

Operation panel screen illustration

Region A icon(mainly Europe and Asia)

Enter date and time using the number keys.

Region B icon(mainly North America)

Enter date and time using the number keys, and then select [AM] or [PM].

5Press [OK].

6Press [End Date / Time].

7Enter date and time, and then press [Sharp].

8Press [OK].

9Press [Output Mode].

10Select [Print], [Standby to Print], [ID Required Print], [Forwarding], or [Store].

11If you select [Forwarding], configure the settings in [Forwarding Destination].

Press [Forwarding Destination], and then configure the following items:

  • [Specify Destination]

    Select this to specify a different forwarding destination from that specified in [Forwarding] in [Reception File Settings].

    Press [Specify Destination], select a destination from the list, and then press [OK].

    • [Security]

      Press [Security], press [Encryption] to encrypt an e-mail and [Signature] to attach a signature to an e-mail, and then press [OK].

    • [Print Forwarding Mark]

      To print a forwarding mark on a forwarded document, make sure that [Print Forwarding Mark] is selected.

  • [Same as Basic Settings]

    Select this to specify the same forwarding destination as that specified in [Forwarding] in [Reception File Settings].

After configuring the settings, press [OK].

12If you select [Store], specify the destination for the Reception Report e-mail in [Store: Notify Destination].

Press [Store: Notify Destination], and then configure the following items:

  • [E-mail]

    Select this to send a reception report e-mail.

    • [Notify Destination]

      Press [Notify Destination], select a destination of reception report e-mail from the list, and then press [OK].

    • [Security]

      Press [Security], press [Encryption] to encrypt an e-mail and [Signature] to attach a signature to an e-mail, and then press [OK].

  • [Do not E-mail]

    Select this when a reception report e-mail is not required to be sent.

  • [Same as Basic Settings]

    Select this to send a reception report e-mail to the same destination as that specified in [Store] in [Reception File Settings].

After configuring the settings, press [OK].

13Press [OK] twice.

14Press [Exit].