Turning On/Off the Power
This section explains how to turn the machine on or off.
This machine automatically enters Energy Saver mode or turns off if it is left idle for a certain period of time.
To specify the time the machine waits before it enters Energy Saver mode and/or Auto Off mode, configure the Energy Saver Timer setting and/or Auto Off Timer setting, respectively. See System Settings
.
Main switch (left side of the machine)
Turning off this switch will completely turn off power to the machine.
Operation switch (right side of the control panel)
Press to activate the machine. When the machine has finished warming up, you can make master and prints.
