Changing the Machine Settings

• [System] page

  You can specify [Device Name], [Comment], [Location], and [Recycle Paper Mode].

• [Date/Time] page

  You can specify [Set Date], [Set Time], [SNTP Server Address], [SNTP Polling Interval], [Time Zone], and [Daylight saving time settings].

• [Email] page

  For details about the items and descriptions, see Notifying the Machine Status by E-mail.

• [ROM Update] page

  You can check the ROM firmware version and update the firmware as necessary. Download the latest update from the manufacturer's website and update the firmware according to the displayed instructions.

See Notifying the Machine Status by E-mail.

• [Administrator Authentication] page

  You can specify [New Password] and [Confirm New Password].

• [Restore Defaults] page

  You can restore the default settings for the network interface.

• [Interface Settings] page

  • [Ethernet]

    You can specify [Ethernet Speed].

• [Wireless LAN Settings] page

  • [Wireless LAN Settings]

    You can specify [SSID] and [Security Method].

  • [WEP Settings]

    You can specify [New WEP Key] and [Confirm WEP Key].

  • [WPA Settings]

    You can specify [WPA Encryption Method], [WPA Authentication Method], [PSK], [Confirm PSK], [User Name], [EAP Type], [Password], and [Confirm Password].

  • [Firmware Update]

    You can update the wireless LAN firmware as necessary.

    Download the latest update from the manufacturer's website and update the firmware according to the displayed instructions.

• [IPv4] page

  You can specify whether to enable or disable [IPv4].

  • [Ethernet + Wireless LAN]

    You can specify [Host Name], [DHCP], [Notify Host Name to DHCP Server], [Domain Name], [Use Domain Name], [IPv4 Address], [Subnet Mask], and [AutoIP].

  • [Details]

    You can specify [Default Gateway Address], [DNS Server1], [DNS Server2], [DNS Protocol Priority], [LPR(515)], [DIPRINT(9100)], [IPP(80/631)], [WSD (Device)], [WSD (Device) Port Number], [WSD (Printer)], [WSD (Printer) Port Number], [WSD (Printer) / IPP Timeout], and [LLTD].

• [IPv6] page

  You can specify whether to enable or disable [IPv6].

  • [Ethernet + Wireless LAN]

    You can specify [Host Name], [Domain Name], and [Manual Configuration Address].

  • [Details]

    You can specify [Default Gateway Address], [DNS Server1], [DNS Server2], [DNS Protocol Priority], [LPR(515)], [DIPRINT(9100)], [IPP(80/631)], [WSD (Device)], [WSD (Device) Port Number], [WSD (Printer)], [WSD (Printer) Port Number], [WSD (Printer) / IPP Timeout], and [LLTD].

• [DHCPv6] page

  You can specify [DHCPv6 Operation Mode], [IAID], and [Request Timeout].

• [DDNS] page

  You can specify [IPv4], [IPv6], [A Record Registration for DHCP], [AAAA Record Registration for DHCPv6], [Operation when records are duplicated], and [Interval to Update Device's Record].

• [SNMP] page

  • [Protocol]

    You can specify whether to enable or disable IPv4 and IPv6 when using [SNMP(161)].

  • [SNMPv1,v2 Setting]

    You can specify [SNMPv1,v2 Function], [SNMPv1 Trap Communication], and [SNMPv2 Trap Communication].

  • [Community]

    You can configure up to four SNMP communities.

• [SNMPv3] page

  • [SNMPv3 Setting]

    You can specify [SNMPv3 Function], [SNMPv3 Trap Communication], and [Permit SNMPv3 Communication].

  • [Permit SNMPv3 Communication]

    You can configure up to five SNMPv3 trap destinations.

  • [Account(User)]

    You can specify [Account Name(User)], [Authentication Password(User)], [Authentication Password re-enter(User)], [Encryption Password(User)], [Encryption Password re-enter(User)], and [Access Type(User)].

  • [Account(Administrator)]

    You can specify [Account Name(Administrator)], [Authentication Password(Administrator)], [Authentication Password re-enter(Administrator)], [Encryption Password(Administrator)], [Encryption Password re-enter(Administrator)], and [Access Type(Administrator)].

• [Bonjour] page

  You can specify whether to enable or disable IPv4 and IPv6 when using [Bonjour].

  • [Details]

    You can specify [Computer Name] and [Location].

  • [Print Order Priority]

    You can specify [DIPRINT], [LPR], and [IPP].

• [Network Security] page

  • [SSL/TLS Version]

    You can specify [TLS1.1], [TLS1.0], and [SSL3.0].

  • [Encrypted Communication Settings]

    You can specify [AES], [3DES], and [RC4].

• [Access Control] page

  • [IPv4]

    You can configure up to five access control ranges.

  • [IPv6]

    You can configure up to five [Range] and [Mask] settings.

• [IPP Authentication] page

  You can configure up to ten [Authentication], [User Name], and [Password] settings.

• [SSL/TLS] page

  You can specify [SSL/TLS(443)] and [Permit SSL/TLS Communication].

• [Site Certificate] page

  • [Imported Site Certificate]

    You can select [Delete] or [Update to Trustworthy Certificate] for an imported site certificate.

  • [Site Certificate to Import]

    Import the site certificate according to the displayed instructions.

• [Device Certificate] page

  You can select [Create], [Request], [Install], [Install intermediate Certificate], [Delete/Cancel Request], and [Delete intermediate Certificate] for up to three certificates.

  • [Certification]

    Select the certificate to be used in [SSL/TLS], [Wireless LAN], and [IPsec].

• [IPsec] page

  You can specify [IPsec].

  You can configure up to ten parameters.