Skip header
 

V. Auto Ppr Select: Margin Tolerance

Specify tolerance values to allow for the difference between the paper size and the image size within the range -50 to 50% in increments of 1% when a paper input location that is appropriate for the image is selected automatically.

The default is 5%.

Operations

  • If the tolerance is set to "10%", a paper input location is selected assuming that the paper is large enough to allow printing of an image 10% larger in size (110% overall) than otherwise determined. When it is set to "-10%", a paper input location is selected assuming that the paper only allows printing of an image 10% smaller (90% overall).

Conditions

  • If "Off" is selected for "U. Auto Paper Select", or "tray" and "paper" are specified in the printing option but not "autopaper", this setting is ignored.

  • If "tolerance" is specified in the "autopaper" printing option, this setting is ignored.

Note

  • In order to automatically select a paper input location with the appropriate size paper for the input image size, specify "U. Auto Paper Select" or the "autopaper" printing option.