Previous
Use this setting to enable the function to automatically select a paper input location with the appropriate paper size for the input image size. Images are also rotated in appropriate orientation when printing.
Settings
Off
On
Default: On
Operations
If "Off" is selected, Automatic paper selection is disabled.
If "On" is selected, Automatic paper selection is enabled.
If "On" is selected, the settings for "1. Select Paper Input Location", "2. Paper Size", "5. Orientation", "H. Multipages Per Sheet: No. of Col.", and "I. Multipages Per Sheet: No. of Rows" and the "portrait", "landscape", "multicols", and "multirows" printing options are ignored.
Some paper input locations may be excluded as targets of the automatic paper input selection. Paper is fed from the paper input location indicated on the control panel if all paper input locations are excluded as selection targets.
If either of "8. Reproduction Ratio", "J. Reduce/Enlarge Ratio: Horizontal", "K. Reduce/Enlarge Ratio: Vertical", "T. Auto R/E to Scanned Image Size", "b. Auto Reduce", "9. Left Margin", "A. Right Margin", "B. Top Margin", "C. Bottom Margin", "D. X Offset", or "E. Y Offset" has been configured, or if either of the "mag", "xmag", "ymag", "tifffit", "notifffit", "autoreduce", "leftspace", "rightspace", "topspace", "bottomspace", "xoffset", or "yoffset" printing options is specified, a paper input location is selected according to the image size that reflects these configurations and settings.
Configure "V. Auto Ppr Select: Margin Tolerance" to specify tolerance values for an image that is larger than the appropriate size paper or margins that may be created.
If an image size is larger than the largest paper size loaded in the selected target paper input locations, the paper input location loaded with the largest size paper is selected from these paper input locations.
Priority may be given to a custom size paper input location if "On" is selected for "X. Synchro Cut" or if "freecut" is specified in the "autopaper" printing option.
Conditions
If either of the "tray", "paper", or "autopaper" printing option is specified, this setting is ignored.
If opposite orientation printing is enabled by PJL or its related printing option, images may be rotated by 180 degrees when printing.
