Skip header
 

Selecting a paper input location automatically - Performing reduced printing on the paper size specified

Use the following procedure to configure the machine to automatically reduce data that is larger than the specified paper size to match the paper when printing.

The example below is for printing A2-sized data on A3 paper.

1Press the [User Tools / Counter] key.

2Press [Printer Features].

3Press [Right arrow key].

4Press the [RPGL Menu] tab.

5Press [Down arrow keyNext].

6Press [43. Auto Select Paper Input].

7Press [Specify Paper Size & Auto R/E].

8Make sure that [A3] is displayed, and then press [OK].

9Press [Exit].

10Press [OK].

11Print the data from the computer.

The size determined according to the settings for "47. Method to Determine Orig. Size" on the RPGL Menu is reduced to match A3 paper for printing.

Note

  • For RP-GL, the data is reduced to the size with a 10-mm margin at each edge (top, bottom, left and right) to the positions specified in "23. Hard Clip". The data is automatically reduced and printed at a slightly smaller size than the paper.

  • For RP-GL/2, the data is reduced to the size with a 7-mm margin at each edge (top, bottom, left and right) to the specified paper size. The data is automatically reduced and printed at a slightly smaller size than the paper.

  • For details about how to configure the settings for "43. Auto Select Paper Input", see 43. Auto Select Paper Input.

PreviousNext