Selecting a paper input location automatically - Printing at full size

Use the following procedure to enable the automatic selection of a paper input location when the print data size matches the paper size.

Press the [User Tools / Counter] key.

Press [Printer Features].

Press [].

Press the [RPGL Menu] tab.

Press [Next].

Press [43. Auto Select Paper Input].

Press [Long Edge and R/E Ratio] or [Long Edge], and then press [OK].

For RP-GL, select "Long Edge and R/E Ratio". For RP-GL/2, select "Long Edge and R/E Ratio" or "Long Edge".

Press [Previous].

Press [20. Reproduction Ratio].

Make sure that "100.0%" is selected as the Reproduction Ratio, and then press [OK].

If a different value is displayed, enter "100.0%" using the number keys.

Press [Exit].

Press [OK].

Print the data from the computer.

Paper is fed from the input location loaded with the size of paper determined by "46. Ppr Type for Autoselect Ppr Input".

For details about how to configure the settings in "43. Auto Select Paper Input", see 43. Auto Select Paper Input .