Top Page > RP-GL/2 and RTIFF > How to Print Documents > Operation Work Flow for Using RP-GL/2 or RTIFF

Operation Work Flow for Using RP-GL/2 or RTIFF

PreviousNext

The operation work flow for printing data using RP-GL/2 or RTIFF on this machine is as follows:

Create print data using an application.

Configure the print settings for this machine.

To configure the print settings, open the User Tools screen on the machine's control panel, and select the [RPGL Menu] or [RTIFF Menu] tab under [Printer Features]. Some of the print settings can also be configured using Web Printing Tool.

Check the machine's printer language.

Use the [System] tab under [Printer Features] in User Tools to configure the [Printer Language] setting. When [Printer Language] is set to [Auto], the printer automatically selects the printer language according to the print data. When [Printer Language] is set to a setting other than [Auto], an error occurs if the print data and the [Printer Language] setting does not match.

Transfer the print data.

You can use Web Printing Tool in a Web browser to print data, or use the print commands to print data directly. For details, see Using Web Printing Tool or Using Direct Printing .