Insert a memory storage device into the media slot.
For details about inserting a memory storage device, see "Inserting/Removing a Memory Storage Device", Getting Started.
Press the [Home] key on the top left of the control panel, and press the [Printer] icon on the [Home] screen.
Press [Print from Memory Storage Device].
Select the memory storage device that contains the file you want to print.
Only one memory storage device can be selected at a time.
Select the file you want to print.
You can simultaneously select multiple files of the same file type in the current folder.
To print a password-protected PDF file, press [Enter Passwrd], and then enter the password.
If necessary, press [Detailed Settings] to configure detailed print settings.
Note that certain settings cannot be selected simultaneously.
Press [Start Printing] or the [Start] key to start printing.
When printing is complete, Press [Back to dev. slct. scr.].
Remove the memory storage device.
For details about removing a memory storage device, see "Inserting/Removing a Memory Storage Device", Getting Started.
Depending on the security setting, [Print from Memory Storage Device] may not appear. For details, see Security Guide.
You cannot select multiple files of different formats at the same time.
Files or groups of files larger than 1 GB cannot be printed.
You can select up to 999 JPEG files at once, as long as the total size of the files you select does not exceed 1 GB.
The machine might print data that appears to be black-and-white in color printing mode. If you need to make sure that the data is printed in black-and-white, specify black-and-white for the print job.
Paper size is not automatically selected when a JPEG file is selected.
If you insert another memory storage device while following the procedure above, a list of files and folders in the root directory on that memory storage device will appear.
If the memory storage device is partitioned, only the files stored on the first partition can be printed.
If a USB flash memory device is inserted in the media slot, the LED on the slot will light up and remain lit.
If an SD card is inserted in the media slot, the LED on the slot will not light up, but will flash when the card is being read.
Do not remove a memory storage device or disconnect a USB cable while the LED is flashing.