Previous
This section describes the user tools in the Edit menu under [Copier / Document Server Features].
Adjust Position
Specify the default for Adjust Print Position.
The range of adjustment is 0 to 200 mm (0 to 7.9 inches) in 1 mm (0.1 inches) steps.
Default:
(mainly Europe)
[Right 20 mm], [Bottom 20 mm]
(mainly North America)
[Right 0.8 inch], [Bottom 0.8 inch]
Erase Border Width
Specify the width for erasing border.
Use the number keys to specify the width of the erased border from 2 to 99 mm (0.1 to 3.9 inches) in 1 mm (0.1 inches) steps.
Default:
(mainly Europe)
[10 mm]
(mainly North America)
[0.4 inch]
Erase Original Shadow in Combine
In Combine mode, you can specify whether to erase a 3 mm, 0.1 inches boundary margin around all four edges of each original.
Default: [On]
Copy Order in Combine
You can select the copy order in Combine mode from [From Left to Right] or [From Top to Bottom].
From Left to Right
From Top to Bottom
Default: [From Left to Right]
Image Repeat Separation Line
You can select a separation line using the Image Repeat function from: [None], [Solid], [Broken A], [Broken B], or [Crop Marks].
Default for [Type of Separation Line]: [None]
In full color, you can also select the color of the separation line.
Default for [Colour of Separation Line in Full Colour]: [Black]
Separation line color cannot be specified when selecting [None].
In black and white, printing will be done in black.
Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06 inches) in width along the separation line.
Double Copies Separation Line
You can select a separation line using the Double Copies function from: [None], [Solid], [Broken A], [Broken B], or [Crop Marks].
Default for [Type of Separation Line]: [None]
In full color, you can also select the color of the separation line.
Default for [Colour of Separation Line in Full Colour]: [Black]
Separation line color cannot be specified when selecting [None].
In black and white, printing will be done in black.
Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06 inches) in width along the separation line.
Separation Line in Combine
You can select a separation line using the Combine function from: [None], [Solid], [Broken A], [Broken B], or [Crop Marks].
Default for [Type of Separation Line]: [None]
In full color, you can also select the color of the separation line.
Default for [Colour of Separation Line in Full Colour]: [Black]
Separation line color cannot be specified when selecting [None].
In black and white, printing will be done in black.
Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06 inches) in width along the separation line.
Program / Delete Format
Store a format image for use with Format Overlay. You can store up to four formats. For details about how to program, change, or delete a format, see Storing a format
or Deleting a stored format.
Margin Adjustment Priority
Specify the default for the margin size. You can specify the top and bottom margin size.
The range of adjustment is 0 to 200 mm (0 to 7.9 inches) in 1 mm (0.1 inches) steps.
(mainly Europe)
Default for [Top]: [20 mm]
Default for [Bottom]: [20 mm]
(mainly North America)
Default for [Top]: [0.8 inch]
Default for [Bottom]: [0.8 inch]
Partial Copy Size
Specify the default of the start position (Y1) and the copy size (Y2).
The size can be specified as follows:
Y1: 0 mm to 14790 mm (0.0 to 582.2 inches) in 1 mm (0.1 inches) increments
Y2: 210 mm to 15000 mm (8.3 to 590.5 inches) in 1 mm (0.1 inches) increments
(mainly Europe)
Default for [Y1]: [0 mm]
Default for [Y2]: [210 mm]
(mainly North America)
Default for [Y1]: [0.0 inch]
Default for [Y2]: [8.3 inch]
For details about how to change the Copier / Document Server Features, see "Changing Default Settings", Connecting the Machine/ System Settings.
