Paper that has a horizontal length of 279.4–914.4 mm (11.00–36.00 inches) and a vertical length of 210.0–2000.0 mm (8.27–78.74 inches) can be fed in from the paper bypass location.
Open the front cover, and then pull up the paper holding lever.
Insert the paper copy side up into the paper bypass location.
Lower the paper holding lever, and then close the front cover.
Specify the type of the paper as necessary.
Make sure that the paper bypass location (
) is selected, and then press the [
] key.
Press [Paper Size].
Press [Custom Size].
Enter the horizontal size with the number keys, and then press [
].
Enter the vertical size with the number keys, and then press [
].
Press [OK] twice.
Place the original, and start scanning.
Copying starts automatically.
You can register a custom paper size. For details, see Registering a custom size. You can also recall the registered custom paper size. For details, see Recalling the registered custom size
.