Copying onto Regular Size Paper from the Paper Bypass Location

Open the front cover, and then pull up the paper holding lever.

Insert the paper copy side up into the paper bypass location.

Lower the paper holding lever, and then close the front cover.

Specify the type of the paper as necessary.

Make sure that the paper bypass location () is selected, and then press the [] key.

Press [Paper Size].

Select the paper size.

Operation panel screen illustration

Press [OK] twice.

Place the original, and start scanning.

Copying starts automatically.

For details about paper sizes that can be loaded in the paper bypass location, see "Recommended Paper Sizes and Types", Paper Specifications and Adding Paper.