|
Front and left view
ADF
Lower the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
Exposure glass
Place originals face down here.
Ventilation holes
Prevent overheating.
Main power switch
To operate the machine, the main power switch must be on. If it is off, turn the switch on.
Control panel
See Guide to the Names and Functions of the Machine's Control Panel.
Internal Tray 1
Copied/printed paper and fax messages are delivered here.
Front cover
Open to access the inside of the machine.
Paper trays
Load paper here.
Lower paper trays
Load paper here.
For details, see Guide to Functions of the Machine's Options.
Front and right view
Extender
Raise the extender to support large paper.
Ventilation holes
Prevent overheating.
Paper guides
When loading paper in the bypass tray, align the paper guides flush against the paper.
Bypass tray
Use to copy or print on thick paper, OHP transparencies, envelopes, and label paper (adhesive labels).
Extender
Pull this extender out when loading A4, 81/2 × 11 or larger size paper in the bypass tray.
Lower right cover
Open this cover when a paper jam occurs.
Lower paper tray right cover
Open this cover when a paper jam occurs.
Right cover
Open this cover to remove jammed paper fed from the paper tray.
The duplex function partially ejects paper out of the machine so that the paper can be flipped over. Do not try to remove the paper while it is being flipped over by the duplex function.