Guide to Components (mainly Europe and Asia)

Front and left view

1. Exposure glass cover or ADF

   (The illustration shows the ADF.)

   Lower the exposure glass cover or the ADF over originals placed on the exposure glass.

   If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.

2. Exposure glass

   Place originals face down here.

3. Ventilation holes

   Prevent overheating.

4. Main power switch

   To operate the machine, the main power switch must be on. If it is off, turn the switch on.

5. Control panel

   See Guide to the Names and Functions of the Machine's Control Panel.

6. Internal Tray 1

   Copied/printed paper and fax messages are delivered here.

7. Front cover

   Open to access the inside of the machine.

8. Paper trays

   Load paper here.

   The Type 1 model has one paper tray.

9. Lower paper trays

   Load paper here.

   For details, see Guide to Functions of the Machine's Options.

Front and right view

1. Extender

   Raise the extender to support large paper.

2. Ventilation holes

   Prevent overheating.

3. Paper guides

   When loading paper in the bypass tray, align the paper guides flush against the paper.

4. Bypass tray

   Use to copy or print on thick paper, OHP transparencies, envelopes, and label paper (adhesive labels).

5. Extender

   Pull this extender out when loading A4, 8¹/₂ × 11 or larger size paper in the bypass tray.

6. Lower right cover

   Open this cover when a paper jam occurs.

7. Lower paper tray right cover

   Open this cover when a paper jam occurs.

8. Right cover

   Open this cover to remove jammed paper fed from the paper tray.