Previous
The Stored Print files are not deleted even after the printing has been completed. For the procedure to delete the documents, see Deleting Stored Print files
.
Press the [Home] key on the top left of the control panel, and press the [Printer] icon on the [Home] screen.
Press the [Print Jobs] tab.
Press [Stored Jobs].
Select the files you want to print.
You can select all the Stored Print files at once by pressing [All Jobs] after selecting a file.
Press [Print].
If you set the password in the printer driver, enter the password.
If multiple print files are selected, and some of these require a password, the machine prints files that correspond to the entered password and files that do not require a password. The number of files to be printed is displayed on the confirmation screen.
To change the print settings of the document, press [Det.Settings].
For details about the settings that can be configured, see Settings that Can Be Configured on the Control Panel.
Enter the number of copies using the number keys if necessary, and then press [Resume Prt.].
If you change the number of copies when multiple documents are selected, the newly specified number of copies will be printed for all of the selected documents. If you do not change the number, the number of copies specified when the documents were stored will be printed for each document.
To stop printing after printing has started, press [Job Reset] or the [Stop] key on the [Printer] screen. A Stored Print file is not deleted even if [Job Reset] is pressed.
You can also print a Stored Print file from Web Image Monitor. For details, see Web Image Monitor Help.
