Skip header
 

Current Machine Status

This section explains how you can check the machine's status and the items displayed. Depending on the options installed on the machine, some items might not be displayed.

Messages

Description

Call Service Center

There is a malfunction in the machine.

Canceling Job...

The job is being reset.

Configuring...

Setting is being changed.

Cover Open: Front Cover

The front cover is open.

Cover Open: Intrnl. Tray 2 Exit

Internal Tray 2 is open.

Cover Open: Lower Paper Tray

Lower Paper Tray Right Cover is open.

Cover Open: Lower Right

The lower right cover is open.

Cover Open: Right Cover

The right cover is open.

Current Job Suspended

The current job is suspended.

Empty: Black Toner

The black toner cartridge is almost empty.

Energy Saver Mode

The machine is in Energy Saver Mode.

Error: Ethernet Board

An Ethernet board error has occurred.

Error: HDD Board

A hard disk drive board error has occurred.

Error: Optional Font

An error has occurred in the font file of the machine.

Error: Optional RAM

There is a malfunction in the optional RAM.

Error: Parallel I/F Board

An error has occurred in the parallel interface.

Error: PDL

An error has occurred in the page description language.

Error: Rem. Certificate Renewal

An error has occurred in the remote server renewal.

Error: USB Interface

An error has occurred in the USB interface.

Error: Wireless Board

An error has occurred in the Wireless LAN interface unit or the Bluetooth interface unit.

Error: Wireless Card

The Wireless LAN interface unit or the Bluetooth interface unit is taken out after startup.

There is no Bluetooth interface unit at startup.

Hex Dump Mode

It is a hex dump mode.

In Use: Input Tray

Other functions is using the input tray.

Jobs Suspended

All jobs are suspended.

Key Card not inserted

The machine is waiting for key card to be inserted.

Key Counter not inserted

The machine is waiting for key counter to be left in it.

Low: Toner

The toner cartridge is not set correctly, or toner is almost running out.

Mismatch: Paper Size

Indicated paper tray does not contain paper of selected size.

Mismatch: Paper Size and Type

Indicated paper tray does not contain paper of selected size and type.

Mismatch: Paper Type

Indicated paper tray does not contain paper of selected type.

No Paper: Selected Tray

There is no paper in specified tray.

Not Detected: Input Tray

The paper feed tray is not correctly set.

Not Detected: PCU (K)

The photoconductor unit is not correctly set.

Offline

Machine is offline.

Paper Misfeed: Duplex Unit

The paper has jammed in the duplex unit.

Paper Misfeed: Input Tray

The paper has jammed in the paper trays, bypass tray or lower paper trays.

Paper Misfeed: Int. Tray 2 Exit

The paper has jammed in the Internal Tray 2.

Ppr. Msfd.:Int./Output/Int.Tr.2

The paper has jammed in the paper feed unit.

Printing...

Printing is in progress.

Proxy User/Password Incorrect

The proxy user name and/or password setting is incorrect.

RC Gate Connection Error

RC Gate communication error has occurred.

Ready

The machine is ready to print.

Renewing Remote Certificate

The remote certificate is being renewed.

Replace PCU

It is time to replace the photoconductor unit.

SD Card Authentication failed

SD card authentication failed.

Supplies Order Call failed

The supply order call has failed.

Tray Error: Duplex Printing

Selected paper tray cannot be used for duplex printing.

Warming Up...

The machine is warming up.

Note

  • For details about UNIX commands, see UNIX Supplement.

  • Check the error contents that may be printed in the configuration page.