Previous
Sample Print files, Locked Print files, and Hold Print files will be deleted after printing finishes. Stored Print files will not be deleted. For the procedure to delete Stored Print files, see Deleting Stored Documents
.
Press the [Printer] icon on the [Home] screen.
For details about how to access the [Home] screen, see How to Use the [Home] Screen.
Press the [Print Jobs] tab.
Select the user ID whose file you want to print.
You cannot select multiple user IDs at the same time.
Select the files you want to print.
You can simultaneously select all files of the same type by pressing [All Jobs] after selecting a file.
If necessary, press [Preview] to check the print image of the document.
Press [Print].
If you set a password in the printer driver, enter the password.
If multiple print files are selected, and some of these require a password, the printer prints files that correspond to the entered password and files that do not require a password. The number of files to be printed is displayed on the confirmation screen.
To change the print settings of the document, press [Det.Settings].
For details about the settings that can be configured, see Settings that can be configured on the control panel.
To change the number of copies, press [Change], and then enter a new number using the number keys.
Press [Resume Prt.].
If you change the number of copies when multiple documents are selected, the newly specified number of copies will be printed for all of the selected documents. If you do not change the number, the number of copies specified when the documents were stored will be printed for each document.
