Previous
Spool Printing allows print jobs transferred from a computer to be temporarily stored, and then prints them after they are transferred. This shortens printing time as it maximizes printer efficiency.
This feature is available only if the hard disk is installed on the printer. If you are using Type 1 model, install the hard disk.
During Spool Printing, the hard disk is accessed and the Data In indicator blinks. Turning off the computer or printer during Spool Printing can damage the hard disk. Also, if the computer or printer is turned off during Spool Printing, spooled jobs will be deleted. Therefore, do not turn the power of the computer or printer off during Spool Printing.
If data is sent to the printer using other protocols besides "diprint", "lpr", "ipp", "ftp", "sftp", "smb", and "wsd (printer)", Spool Printing cannot be performed.
Press [System] on the [Printer Features] screen.
For details about how to access the [Printer Features] screen, see Displaying the Printer Configuration Screens Using the Control Panel
.
Press [
] repeatedly until [Spool Printing] appears.
Press [Spool Printing].
Press [On].
Press [OK].
Press the [User Tools] key.
Spool Printing can be specified in Web Image Monitor. For details about Web Image Monitor, see Web Image Monitor Help.
