Skip header
 

Loading Orientation-Fixed Paper or Two-Sided Paper

Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead paper, punched paper, or copied paper) might not print correctly, depending on how the paper is placed.

Settings for User Tools

Specify [Auto Detect] or [On (Always)] for [Letterhead Setting] in [System] under the Printer Features menu, and then place the paper as shown below.

For details about the letterhead settings, see System.

Paper orientation

The meanings of the icons are as follows:

Icon

Meaning

Illustration of paper orientation

Place or load paper printed side face up.

Illustration of paper orientation

Place or load paper printed side face down.

Print side

Tray 1 or Tray 3 (LCT)

Trays 2–5

Large capacity tray (LCT)

Bypass tray

One-sided

Illustration of paper orientation

Illustration of paper orientation

Illustration of paper orientation

Illustration of paper orientation

Illustration of paper orientation

Illustration of paper orientation

Two-sided

Illustration of paper orientation

Illustration of paper orientation

Illustration of paper orientation

Illustration of paper orientation

Illustration of paper orientation

Illustration of paper orientation

Note

  • To print on letterhead paper when [Auto Detect] is specified for [Letterhead Setting], you must specify [Letterhead] as the paper type in the printer driver's settings.

  • If a print job is changed partway through printing from one-sided to two-sided printing, one-sided output after the first copy may be printed facing a different direction. To ensure all paper is output facing the same direction, specify different input trays for one-sided and two-sided printing. Note also that two-sided printing must be disabled for the tray specified for one-sided printing.

  • For details about how to make two-sided prints, see Printing on Both Sides of Sheets.