Skip header
 

Top Page > Operating Instructions > Getting Started > Guide to Names and Functions of Components > Guide to Functions of the Printer's Options > Guide to functions of the printer's internal options

Guide to functions of the printer's internal options

Illustration of internal options numbered callout illustration

  1. SD memory card options

    • VM card

      With this card, you can install embedded software applications.

    • NetWare card

      This card is needed when using a NetWare server.

    To attach this option, see Installing SD Card Options.

  2. Optional interface units

    • Gigabit Ethernet board

      Allows you to communicate over 1000BASE-T.

    • Wireless LAN board

      Allows you to communicate over wireless LAN.

    • IEEE 1284 interface board

      Allows you to connect to an IEEE 1284 cable.

    To attach this option, see Installing the Interface Units.

  3. SDRAM module

    You can add 512 MB of memory.

    To attach this option, see Installing the SDRAM module.

  4. Hard disk

    Allows you to store documents to be printed.

    To attach this option, see Installing the hard disk.

Note

  • Only one of the following options can be installed on the printer at any one time: Wireless LAN board, Gigabit Ethernet board, and IEEE 1284 interface board.

  • If you want to use two or more SD cards that can be inserted in the same slot, contact your sales or service representative.

PreviousNext