Home Position
You can specify the transmission settings that are applied after the power is turned on or the [Clear/Stop] key is pressed.
Home Position
Image density
One the five image density levels can be specified as the home position.
Resolution
One of either Standard, Detail, or Fine can be specified as the home position.
Auto density
Auto density can be specified as the home position by setting this to on or off.
Original type
One of Text, Photo or Text/Photo can be specified as the home position.
Transmission mode
Either Immediate Transmission or Memory Transmission can be specified as the home position.
Fax header
The fax header can be specified as the home position by setting this to on or off.
Home Position Parameter List
For details about setting parameters, see Parameter Settings
.
Do not change switches other than those listed.
Switch |
Bit |
Item |
0 |
1 |
|---|---|---|---|---|
00 |
3,2,1 |
Image density |
000: Normal density* 001: The lightest density 010: The darkest density 101: Lighter density 110: Darker density |
|
00 |
5,4 |
Resolution |
00: Standard* 01: Detail 10: Fine |
|
00 |
6 |
Auto density |
Off* |
On |
01 |
1,0 |
Original type |
00: Text 01: Photo 10:Text/Photo* |
|
02 |
1 |
Transmission mode |
Memory transmission* |
Immediate transmission |
02 |
6,5 |
Fax header |
Off* |
On |
* This is a factory default.
