Changing the user parameters
It is recommended that you print and keep a user parameter list when you program or change a user parameter.
Do not change any bit switches other than those shown on the previous pages.
Press the [User Tools] key.
Press [Login].
Enter the login password, and then press the [OK] key.
Press the [
] or [
] key to display [Fax Features], and then press the [OK] key.
Press the [] or [] key to display [Administrator Tools], and then press the [OK] key.
Press the [] or [] key to display [Parameter Setting], and then press the [OK] key.
Press the [] or [] key to display [Parameter Setting], and then press the [OK] key.
If you want to specify the home position setting, select [Home Position].
To print the parameter settings list, select [Parameter Settings List], and then press the [B&W Start] or [Color Start] key.
Select the switch number you want to change using the scroll key, and then press the [OK] key.
Select the bit number you want to change.
Press the [OK] key.
Repeat Steps 8, 9, and 10 to change the switch settings.
After all the settings are finished, press the [Escape] key.
