Skip header
Help
 

Using the Copier Function > Two-Sided or Combined Copying > Two-Sided

Two-Sided

This section explains how to configure settings for two-sided copies by copying single-sided documents onto the front and back sides of each sheet.

Important

  • The paper size must be A4Portrait, A5Landscape, A5Portrait, A6Portrait, B5Portrait, B6Portrait, 81/2 × 11Portrait, 81/2 × 51/2Landscape, 71/4 × 101/2Portrait, 16KPortrait, 100 × 148Portrait, or 148 × 200Portrait.

  • The paper type must be Plain Paper, Inkjet Postcard, or Postcard. If you set [Paper Type] to [Plain Paper], duplex copying can be carried out on inkjet plain paper.

One-sided Two-sided

Copies two 1-sided pages onto one two-sided page.

Original

Placing originals

Original Orientation

Orientation

Copy

Illustration of the original

Illustration of the original

Operation panel screen illustration

Top to Top

Illustration of copy

Illustration of the original

Illustration of the original

Operation panel screen illustration

Top to Bottom

Illustration of copy

1Press the [Copy] key.

2Press [2Sd/Comb].

3Press the [Up arrow key] or [Down arrow key] key to display [1 Sdd. Orig.->2 Sdd. Copy], and then press the [OK] key.

4Press the [Up arrow key] or [Down arrow key] key to display the original orientation, and then press the [OK] key.

5Press the [Up arrow key] or [Down arrow key] key to display the duplex orientation, and then press the [OK] key.

6Place your originals, and then press the [B&W Start] or [Color Start] key.

If you use the exposure glass or SADF mode, press the [Sharp] key when all originals are scanned.

Note

  • If you want to use this function with a custom size paper, contact your sales or service representative.