Setup Procedure

This section explains the tasks necessary for printing.

Install and set up the machine by following the steps in the order shown.

Step	Task	Reference for Full Details
1	Check the installation environment.	Checking the Computer and Installation Area
2	Check the supplied items.	Checking the Supplied Items and Unpacking the Machine
3	Attach the units and options.	Attaching and Detaching Units and Options
4	Install the print cartridges.	Installing the Print Cartridges
5	Plug the power cord in and turn the power on.	Plugging in the Power Cord and Turning the Power On
6	Initial Setup	Initial Setup
7	Load paper.	Loading Paper
8	Perform a test print.	Printing a Configuration Page
9	Confirm the connection method.	Confirming the Connection Method
10	Connect the machine and computer and install the software.	Connecting the Computer and Installing the Software (USB Connection) Connecting the Computer and Installing the Software (Network Connection) If you are using a Macintosh, see Using the Machine with a Macintosh .