Previous
Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead paper, punched paper, or copied paper) might not print correctly, depending on how the originals and paper are placed.
Settings for [System Settings]
Copier mode
Set [Letterhead Setting] to [Yes] in [Input / Output] under the Copier / Document Server Features menu, and then place the original and paper as shown below. For details about the letterhead settings, see "Copier / Document Server Features", Copy/ Document Server.
Printer mode
Specify [Auto Detect] or [On (Always)] for [Letterhead Setting] under the Printer Features menu, and then place the paper as shown below. For details about the letterhead settings, see "Printer Features", Print.
Original orientation and paper orientation
The meanings of the icons are as follows:
Icon |
Meaning |
|---|---|
|
Place or load paper scanned or printed side face up. |
|
Place or load paper scanned or printed side face down. |
Original orientation
Original orientation
Exposure glass
ADF
Portrait (
)
Landscape (
)Copy
Scanner
Paper orientation
Copier mode
Copy side
Tray 1
Trays 2–3
LCT
Bypass tray
One-sided
Two-sided
Printer mode
Print side
Tray 1
Trays 2–3
LCT
Bypass tray
One-sided
Two-sided
In printer mode:
To print on letterhead paper when [Letterhead Setting] is set to [Auto Detect], you must specify [Letterhead] as the paper type in the printer driver's settings.
If a print job is changed partway through printing from one-sided to two-sided printing, one-sided output after the first copy may be printed facing a different direction. To ensure all paper is output facing the same direction, specify different input trays for one-sided and two-sided printing. Note also that two-sided printing must be disabled for the tray specified for one-sided printing.
For details about how to make two-sided prints, see "Printing on Both Sides of Sheets", Print.
In copier mode:
For details about how to make two-sided copies, see "Duplex Copying", Copy/ Document Server.
